http://www.hutterperformance.com Product data from HutterPerformance.com http://www.hutterperformance.com/Product/44/160-Degree-Thermostat-04-and-later-LS.aspx We highly recommend installing this lower temperature thermostat for your upgraded or stock vehicle. Lower engine temperatures help reduce the chance of detonation. 44 http://www.hutterperformance.com/media/images/large/vette%20newer%20stat.jpg new 19.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 456-160 http://www.hutterperformance.com/Product/43/160-Degree-Thermostat-98-03-LS-engines.aspx We highly recommend installing this lower temperature thermostat for your upgraded or stock vehicle. Lower engine temperatures help reduce the chance of detonation. 43 http://www.hutterperformance.com/media/images/large/c5%20thermostat.jpg new 39.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 379-160 http://www.hutterperformance.com/Product/41/1997-2003-Corvette-High-Performance-Fuel-Pump.aspx Designed be a direct replacement for the 1997-2003 Corvette and is perfect for turbocharged or supercharged applications. When installed in a C5 Corvette this pump is rated at 600 HP @ 58 PSI allowing for hot fuel handling and jet pump operation. For higher horsepower applications we suggest the addition of the boost-a-pump with the pump which was designed to be run for extended periods of time at 17 volts. General pump specifications: 255 liters-hour @ 43.5 PSI. This pump will not work on 2003 1/2 and newer fuel systems. This would be the VIN after 114930 (last six digits) built November 25, 2002. 41 http://www.hutterperformance.com/media/images/large/c5%20fuel%20pump.jpg new 299.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine L710650197 http://www.hutterperformance.com/Product/65/2010-Camaro-Direct-Port-Nitrous.aspx This kit comes complete with 2 Wilson Pro Flow nitrous solenoids, 2 Wilson Pro Flow fuel solenoids, 4 Wilson Pro Flow distribution blocks, 8 Wilson Pro Flow nozzles, custom bent stainless steel hard lines, fuel and nitrous jets for your desired horsepower level, wiring connectors and pigtail for the solenoids. This kit is currently available only with installation. Simply send your intake for plumbing or as a core exchange. The intake will be shipped to you ready for installation. You will simply have to finish wiring the relay pigtail to your nitrous controller and connect your nitrous and fuel supplies. Be sure to check out the Hutter Performance auto timing retard kit and the Hutter Performance center console nitrous panel. Please call to arrange your install 440-285-8467. 65 http://www.hutterperformance.com/media/images/large/Hut%20Nos%201.JPG new 1899.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders 2010cam-dp-nos-w http://www.hutterperformance.com/Product/64/2010-Camaro-Magna-Charger-Supercharger.aspx Camaro supercharger systems are complete with all components necessary for installation. Included in the kit is the cast aluminum intake manifold, factory "push-lock connectors" are utilized in the fuel system for installation ease, intercooler core, coolant circulation pump, heat exchanger and all necessary hardware to make a complete installation package. This system does not require any hood modifications. This bad boy makes a real-world 492 rear wheel HP, and 455 Ft. lbs. of rear wheel torque Other components include new high capacity fuel injectors, and fuel rails. The hand held computer programmer communications with the factory ECU for proper calibration of the supercharger system. 64 http://www.hutterperformance.com/media/images/large/camaro%20mag%202.jpg new 6595.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders CAM-MAG-BLK http://www.hutterperformance.com/Product/66/2010-Camaro-Nitrous-Console.aspx This nitrous console is designed to fit in the center glove box of the 2010 camaro. The console is populated with a master-arm switch, bottle opener switch, bottle heater switch, purge switch and Autometer electric nitrous pressure gauge. All wires are 3 foot length unterminated. 66 http://www.hutterperformance.com/media/images/large/Nos%20Panel%202.JPG new 544.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders 2010cam-nosconsole http://www.hutterperformance.com/Product/69/2010-Camaro-SS-BREMBO-Big-Brake-Kit-FRONT.aspx CALL OR EMAIL FOR SPECIAL PRICING PLEASE CHOOSE COLOR AND ROTOR STYLE The Gran Turismo system's level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers and discs, thermal capacity and brake torque is increased. This potent combination offers the extreme in Brembo's leading edge technology for high performance street or track use applications. Rotor size: 380mm x 32mm (15in x 1.25in) 69 http://www.hutterperformance.com/media/images/large/camaro%20black%20slotted.jpg new 4050.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Brakes 1M1.9025A http://www.hutterperformance.com/Product/81/2010-Camaro-SS-BREMBO-Big-Brake-Kit-REAR.aspx CALL OR EMAIL FOR SPECIAL PRICING PLEASE CHOOSE COLOR The Gran Turismo system's level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers and discs, thermal capacity and brake torque is increased. This potent combination offers the extreme in Brembo's leading edge technology for high performance street or track use applications. Rotor Size: 380mm x 28mm (15in x 1.1in) 81 http://www.hutterperformance.com/media/images/large/ new 3225.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Brakes 2P1.9016A http://www.hutterperformance.com/Product/80/2010-Camaro-SS-BREMBO-Caliper-Upgrade-FRONT.aspx CALL OR EMAIL FOR SPECIAL PRICING PLEASE CHOOSE COLOR The Gran Turismo system's level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers brake torque is increased. This caliper offers the extreme in Brembo's leading edge technology for high performance street or track use applications. 80 http://www.hutterperformance.com/media/images/large/ new 1895.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Brakes 1N0.8001A http://www.hutterperformance.com/Product/82/2010-Camaro-SS-BREMBO-Caliper-Upgrade-REAR.aspx CALL OR EMAIL FOR SPECIAL PRICING PLEASE CHOOSE COLOR The Gran Turismo system's level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers brake torque is increased. This caliper offers the extreme in Brembo's leading edge technology for high performance street or track use applications. 82 http://www.hutterperformance.com/media/images/large/ new 1705.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Brakes 2P0.8001A http://www.hutterperformance.com/Product/67/2010-Camaro-SS-ProCharger-Supercharger-Kit.aspx Please call for pricing on the F-1-F-1A-F-1C-F-1R upgrades and Cog kits Thanks to the efficiency of the overall ProCharger supercharger system for the 2010 Camaro SS models, owners of otherwise stock vehicles will make more power with less boost, thanks to high-flowing, durable and extremely efficient ProCharger P-1SC-1 supercharger and large air-to-air intercooler. ProCharger's HO Intercooled offering also features an 8-rib, dedicated drive and systems are 100 percent complete. The ProCharger design also features the highest flowing air inlet system when compared to the others' highly restrictive design. ProCharger owners can expect 175 plus horsepower gains on both L99 (automatic) and LS3 (manual) equipped Camaros with just 7 psi of intercooled boost while still running on high-quality pump gas. 67 http://www.hutterperformance.com/media/images/large/procharger%20camaro.jpg new 5999.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders 10camProChg-HO http://www.hutterperformance.com/Product/59/2010-Camaro-Stainless-Works-Exhaust.aspx 2010 Camaro 6.2L 304 SS CNC mandrel bent 3" dual exhaust system with x-pipe, dual chambered turbo mufflers, mirror polished stainless steel tips, and all hangers and clamps for easy installation. Fits Stainless Works Headers. SHIPPING to the contiguous states 59 http://www.hutterperformance.com/media/images/large/2010%20camaro%20exh%20-1.jpg new 1190.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust CA10CBL http://www.hutterperformance.com/Product/57/2010-Camaro-Stainless-Works-Headers.aspx 2010 Camaro 6.2L 304 SS headers with CNC mandrel bent 1-7-8" primaries and 3" slip fit collectors - headers only 57 http://www.hutterperformance.com/media/images/large/2010%20camaro%20headers.jpg new 990.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust CA10HDRST http://www.hutterperformance.com/Product/58/2010-Camaro-Stainless-Works-Headers-and-Cats.aspx 2010 Camaro 6.2L 304 SS headers with CNC mandrel bent 1-7-8" primaries and 3" slip fit collectors with high flow metal matrix catalytic converters and 3" lead pipes to fit to Stainless Works Exhaust System - SHIPPING to the contiguous states 58 http://www.hutterperformance.com/media/images/large/2010%20camaro%20headers%20-2.jpg new 1450.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust CA10HDRCATST http://www.hutterperformance.com/Product/3/Black-Magic-427-Crate-Engine-LS-427-Stage-1.aspx 427 Crate Engine - LS7 block (blueprinted and plate honed) - LS6 style Hutter 240 CNC ported heads - Crower forged Crank - Crower Sportsman or Lunati forged Rods - Coated Main and Rod Bearings - JE Forged Pistons - ARP Main and Head Studs - Coated Titanium Intake Valves - Stainless Exhaust Valves - Jesel Sportsman Rocker Arms - ATI damper - Custom Comp Cams Camshaft - Dual Valve Springs - Titanium Retainers - 3-8 Pushrods - FAST LSX Intake - Injectors - Engine Dyno Tested - and more... NOTE: Many custom options are available depending on your application - email or call to discuss 3 http://www.hutterperformance.com/media/images/large/ new 21500.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Crate Engines BM-LS-427-1 http://www.hutterperformance.com/Product/9/Black-Magic-LS-427-Stage-3-Crate-Engine.aspx A 427 Crate Engine Stage 2 motor plus the following upgrades: Crower Forged Maxi-Light Crank - Crower Forged Maxi-Light Billet Rods NOTE: Many custom options are available depending on your application - email or call to discuss Stage 2 is: LS7 block (blueprinted and plate honed) - Hutter custom CNC LS7 series heads - Crower forged Crank - Crower Sportsman or Lunati forged Rods - Coated Main and Rod Bearings - JE Forged Pistons - ARP Main and Head Studs - Coated Titanium Intake Valves - Stainless Exhaust Valves - Jesel Sportsman Rocker Arms - ATI damper - Custom Comp Cams Camshaft - Dual Valve Springs - Titanium Retainers - 3-8 Pushrods - LS7 Intake - Injectors - Engine Dyno Tested - and more... 9 http://www.hutterperformance.com/media/images/large/ new 23720.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Crate Engines BM-LS-427-3 http://www.hutterperformance.com/Product/8/Black-Magic-LS-427-Stage-4-Crate-Engine.aspx A 427 Crate Engine Stage 3 motor plus the following upgrades: Sleeved lifter bores - Internal oiling system upgrades - Coated Lightweight Custom JE pistons - Total Seal Rings - Super Polished Precision Products Wrist Pins NOTE: Many custom options are available depending on your application - email or call to discuss Stage 3 is: LS7 block (blueprinted and plate honed) - Hutter custom CNC LS7 series heads - Crower Maxi-Light forged Crank - Crower Maxi-Light forged billet Rods - Coated Main and Rod Bearings - JE Forged Pistons - ARP Main and Head Studs - Coated Titanium Intake Valves - Stainless Exhaust Valves - Jesel Sportsman Rocker Arms - ATI damper - Custom Comp Cams Camshaft - Dual Valve Springs - Titanium Retainers - 3-8 Pushrods - LS7 Intake - Injectors - Engine Dyno Tested - and more... 8 http://www.hutterperformance.com/media/images/large/ new 25865.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Crate Engines BM-LS-427-4 http://www.hutterperformance.com/Product/7/Black-Magic-LS-427-Stage-5-LS-Crate-Engine.aspx A 427 Crate Engine Stage 4 motor plus the following upgrades: C5R Race Block - Bryant Ultra-Light Billet Race Crank NOTE: Many custom options are available depending on your application - email or call to discuss Stage 4 is: LS7 block (blueprinted and plate honed) - Sleeved Lifter Bores - Internal oiling system upgrades - Hutter custom CNC LS7 series heads - Crower Maxi-Light forged Crank - Crower Maxi-Light forged billet Rods - Coated Main and Rod Bearings - Coated Lightweight JE Forged Pistons - Super polished Precision Products wrist pins - Total Seal Rings - ARP Main and Head Studs - Coated Titanium Intake Valves - Stainless Exhaust Valves - Jesel Sportsman Rocker Arms - ATI damper - Custom Comp Cams Camshaft - Dual Valve Springs - Titanium Retainers - 3-8 Pushrods - LS7 Intake - Injectors - Engine Dyno Tested - and more... 7 http://www.hutterperformance.com/media/images/large/ new 32065.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Crate Engines BM-LS-427-5 http://www.hutterperformance.com/Product/10/Black-Magic-Stage-2-LS-427-Crate-Engine.aspx A 427 Crate Engine, stage 1 motor plus the following upgrades: Hutter custom CNC LS7 series heads - LS7 Intake - Jesel Adjustable Rockers NOTE: Many custom options are available depending on your application - email or call to discuss Stage 1 is: LS7 block (blueprinted and plate honed) - LS6 style Hutter 240 CNC ported heads - Crower forged Crank - Crower Sportsman or Lunati forged Rods - Coated Main and Rod Bearings - JE Forged Pistons - ARP Main and Head Studs - Coated Titanium Intake Valves - Stainless Exhaust Valves - Jesel Sportsman Rocker Arms - ATI damper - Custom Comp Cams Camshaft - Dual Valve Springs - Titanium Retainers - 3-8 Pushrods - FAST LSX Intake - Injectors - Engine Dyno Tested - and more... 10 http://www.hutterperformance.com/media/images/large/ new 22750.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Crate Engines BM-LS-427-2 http://www.hutterperformance.com/Product/30/C5-Corvette-Kenne-Bell-Supercharger.aspx THE KENNE BELL TWIN SCREW SUPERCHARGER The ultimate supercharger kit for the GM LS engine family. Simply the best of everything - bulletproof billet construction, max HP and torque at ANY rpm, 5-18 psi boost range with no "boost drop off," big potential for future upgrades or higher boost weekend or competition racing, quiet operation, intercooled - and Kenne Bell engineered and calibrated. No other supercharger produces more boost (HP & torque) throughout the engine's rpm band. Any knowledgeable automotive engineer knows the Twin Screw has proven to be the most overall efficient supercharger. Although the Eaton-Roots style is an excellent OEM style cast aluminum case supercharger with a great reputation for reliability, the Twin Screw will always make more HP and torque simply because it requires less engine HP to drive, has a cooler air discharge temp and a higher volumetric efficiency (air in vs. air out). That is why the Twin Screw has become the choice for both OEM and aftermarket vehicles where maximum peak HP is desired without sacrificing low and mid range boost. ADD 650.00 for Polishing of supercharger SUBTRACT 400.00 for Tuner kit (no programmer or injectors) THIS KIT INCLUDES THE KENNE BELL HOOD 30 http://www.hutterperformance.com/media/images/large/kenne%20bell%20polish.jpg new 6999.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders C5-KENNEBELL http://www.hutterperformance.com/Product/6/C5-Corvette-Stainless-Works-Axle-back.aspx 97-2004 Turbo Muffler Axle-Back. CNC MANDREL BENT 3" 304 S-S. CAT BACK EXHAUST FROM THE TWO BOLT FLANGE IN FRONT OF REAR AXLE ALL THE WAY BACK. DUAL 4" SLASH CUT ROLLED EDGE TIPS. 6 http://www.hutterperformance.com/media/images/large/SWorks%20C5%20CAT%20BACK1.JPG new 989.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust VC53CB http://www.hutterperformance.com/Product/12/C5-Corvette-Stainless-Works-Headers.aspx C5 Corvette 1 3-4" or 1 7-8" 16 gauge primary tubes, cnc laser cut 3-8" flanges. Includes exhaust hookups for stock or most aftermarket exhaust systems. Up to 40 RWHP gain over stock. Please choose the correct option for year range and X-Pipe options. The flange options refers to the rear 2-bolt flange, the 3" flange is used with the Stainless works 3" muffler kits. 12 http://www.hutterperformance.com/media/images/large/SWorks%20C5%201_75%20%20headers.JPG new 1175.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust SWC5HDR http://www.hutterperformance.com/Product/54/C6-Corvette-Stainless-Works-Headers-non-Z06.aspx C6 Corvette LS2, 1 3-4" PRIMARIES, 3-8" FLANGES-W-HIGH FLOW METAL MATRIX CONVERTERS OR OFF-ROAD PIPES, 2.5" or 3" X PIPE AND CENTER SECTION. LONG TUBE DESIGN MAKES GREAT POWER AND FITS UNDERCARRIAGE PERFECTLY 54 http://www.hutterperformance.com/media/images/large/ new 1100.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust SWC6HDR http://www.hutterperformance.com/Product/55/C6-Z06-Corvette-Stainless-Works-Headers.aspx ZO6 Corvette Headers with 1-3-4", 1-7-8" or 2" dia. 31" long primaries with "D" shaped port matched flange for Z06. 3" Collectors, tig welded. Includes 3" X-pipe, metallic substrate high flow converters, O2 extensions, Accuseal clamps, clamp-hanger assemblies, oil cooler lines, compression fittings, zip ties, cable clamps, etc. Will require dropping of front cradle and rerouting the oil coooler lines. Please choose the correct option for proper sizing etc. 55 http://www.hutterperformance.com/media/images/large/ new 1950.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust SWC6Zo6HDR http://www.hutterperformance.com/Product/56/C6-Z06-Corvette-Stainless-Works-Mufflers.aspx Z06 AXLE BACK EXHAUST KIT. DESIGNED TO SLIP OVER THE FACTORY INTERMEDIATE PIPES, STAINLESS WORKS 3" EXHAUST SYSTEM FEATURES THE LIGHTEST S-S CONSTRUCTION AVAILABLE, AND A PROVEN STRAIGHT THROUGH MUFFLER DESIGN WHICH DELIVERS AWESOME POWER AND GREAT SOUND. SINGLE ROLLED EDGE, SLASH CUT TIPS-ONE PER SIDE OR QUAD TIPS-TWO PER SIDE. SIGNIFICANTLY LIGHTER THAN STOCK. 56 http://www.hutterperformance.com/media/images/large/ new 1090.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust Z06CB http://www.hutterperformance.com/Product/32/Callaway-Magna-Charger-Supercharger-for-C6.aspx Power - Callaway's Magna Charger system, with its Roots design, provides substantial power increase: 150 bhp with stock LS3. High manifold pressure produced at low engine RPM provides significantly more low end and mid-range torque compared to centrifugal superchargers. Magnuson's unique intercooler design, built into the intake manifold base (patent pending), lowers charge air temperature up to 100F to increase power. Reliability - Internal Magna Charger components are manufactured by Eaton, the world's leading OEM supercharger supplier, and ensure bulletproof reliability. Our testing confirms that this is the only supercharger system capable of 100,000 mile durability. Drivability - Callaway's expert engine management calibration provides perfect street manners, eliminating engine-damaging detonation and maintaining excellent fuel economy and emission compliance. Fuel Economy - During low-load cruising conditions, the supercharger's internal bypass allows the rotors to spin ly, reducing parasitic drag to less than one-third of one horsepower. Fuel mileage is normally within 1-2 to 1 mpg less than stock. Emissions Compliance - Executive Order exemptions (E.O. D-488-6, D-488-12, D-488-14) have been issued by the California Air Resources Board (CARB) for 1997 to 2009 Corvette applications, making most systems 50-state "street-legal". ADD 1100.00 for POLISH finish ADD 800.00 for the MP-122 upgrade ADD 800.00 for the LS3 engine (this includes the MP-122 upgrade) THIS KIT DOES NOT INCLUDE A HOOD 32 http://www.hutterperformance.com/media/images/large/callaway%20magnacharger_1.jpg new 6595.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders CAL-MC-C6 http://www.hutterperformance.com/Product/31/Callaway-Supercharger-Magna-Charger-for-C5.aspx Power - Callaway Supercharger Magna Charger system, with its Roots design, provides substantial power increase: 150 bhp with stock LS3. High manifold pressure produced at low engine RPM provides significantly more low end and mid-range torque compared to centrifugal superchargers. Magnuson's unique intercooler design, built into the intake manifold base (patent pending), lowers charge air temperature up to 100F to increase power. Reliability - Internal Magna Charger components are manufactured by Eaton, the world's leading OEM supercharger supplier, and ensure bulletproof reliability. Our testing confirms that this is the only supercharger system capable of 100,000 mile durability. Drivability - Callaway's expert engine management calibration provides perfect street manners, eliminating engine-damaging detonation and maintaining excellent fuel economy and emission compliance. Fuel Economy - During low-load cruising conditions, the supercharger's internal bypass allows the rotors to spin ly, reducing parasitic drag to less than one-third of one horsepower. Fuel mileage is normally within 1-2 to 1 mpg less than stock. Emissions Compliance - Executive Order exemptions (E.O. D-488-6, D-488-12, D-488-14) have been issued by the California Air Resources Board (CARB) for 1997 to 2009 Corvette applications, making most systems 50-state "street-legal". THIS KIT DOES NOT INCLUDE A HOOD 31 http://www.hutterperformance.com/media/images/large/callaway%20magnacharger.jpg new 6595.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders CAL-MC-C5 http://www.hutterperformance.com/Product/5/CCW-Wheel.aspx Single Piece Forged 6061-T6 Aluminum CNC Machined Accommodates Big Brake Setups Multiple styles, colors and sizes are available. Please contact for final ordering and pricing. 5 http://www.hutterperformance.com/media/images/large/CCW%20Classic.jpg new 2800.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Wheels CCW http://www.hutterperformance.com/Product/52/Corvette-Racing-ABS-system.aspx This is a aftermarket ABS system based on a Bosch control unit. This sytem is meant for racing use and includes a race calibrated control computer, sensors, custom harness (built to your measurements), reluctor wheels and software. The system has multiple settings for choosing the level of interaction the system has with regards to car handling. This system is currently being used on the Whelen corvettes in SCCA Speed World Challenge GT racing and several of our track day customers. Installation is also available at our facility. 52 http://www.hutterperformance.com/media/images/large/ new 12000.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Brakes ABS http://www.hutterperformance.com/Product/50/Custom-Chassis-Dyno-Tune-GM.aspx This is our basic tune cost for GM LS vehicles including Corvette, F-body and GTO. This price is for a slightly modified vehicle including no more than cold air intake and header-exhuast upgrades. Vehicles with engine upgrades and-or boost will be charged an extra 100.00. Other GM vehicles will be charged an extra 100.00 to 150.00 depending on model and up to an extra 100.00 depending on modifications. Please call with any questions and-or to schedule an appointment. This service must be performed at our facility. 50 http://www.hutterperformance.com/media/images/large/ new 550.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > VCM/Engine Electronics GMtune-1 http://www.hutterperformance.com/Product/51/Custom-Chassis-Dyno-Tuning.aspx Hutter Performance is proud to offer our custom tuning service for aftermarket fuel injection systems. Our experience includes Motec, FAST, Gen7, BigStuf3 and others. Tuning rate is 125.00 per hour. Please call with questions. 51 http://www.hutterperformance.com/media/images/large/ new 0.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > VCM/Engine Electronics Tuning http://www.hutterperformance.com/Product/49/Custom-Drag-Wheelie-Bars.aspx Our wheelie bars are completely TIG welded in our facility and built to your car specifications. The bars are built with 1.25" main tubes and all tubes are Chromoly 4130. 49 http://www.hutterperformance.com/media/images/large/wheeliebar%20-2.JPG new 1190.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Chassis/Rollcage wheeliebar http://www.hutterperformance.com/Product/47/Drag-Style-Roll-Cage.aspx Features custom designed roll cages- roll bars completely TIG welded at our facility. The cages are built to meet the desired NHRA certification. Our roll cages are designed to maximize driver safety and enhance chassis rigidity and handling. Our cages are offered in DOM mild steel or 4130 Chromoly. The installation must be performed at our facility. Please contact us for scheduling. Additional upgrades are available for this rollcage, call for details. Transportation is available for an additional fee. 47 http://www.hutterperformance.com/media/images/large/drag%20cage%20-1.JPG new 0.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Chassis/Rollcage DRAG-CAGE http://www.hutterperformance.com/Product/88/Edelbrock-Cooling-System-Upgrade-Kit-for-2005-06-Ford-Mustangs.aspx The cooling system upgrade kit is necessary when installing the new Edelbrock E-Force Supercharger Kits #1580 and #1585 in a 2005-2006 mustang GT. This kit relocates the thermostat from the cold side of the radiator to the hot side for improved cooling. Kit contains all necessary hoses, clamps and hardware. 88 http://www.hutterperformance.com/media/images/large/ new 120.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders 15804 http://www.hutterperformance.com/Product/87/Edelbrock-E-Force-Supercharger-System.aspx The Edelbrock E-Forece Supercharger System for the 2005-2010 Ford Mustang 3.5L 3v will allow you to boost your mustang to approximate power level of 466 flywheel horsepower and 439 ft-lbs of torque. Theis system was exclusively designed by Edelbrock to provide instant, reliable and safe horsepower for a stock mustang 4.6L with low boost for minimum stress on the engine. 87 http://www.hutterperformance.com/media/images/large/e-force-brochure.pdf new 5399.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders EForce http://www.hutterperformance.com/Product/89/Edelbrock-Hardware-Kit-for-2009-Ford-Mustang.aspx This kit includes new intake gaskets and necessary hardware when installing E-Force kit #1580 and #1585 on 2009 mustang 4.6L engines. 89 http://www.hutterperformance.com/media/images/large/ new 52.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders 15805 http://www.hutterperformance.com/Product/16/FAST-92mm-LS-Throttle-Body.aspx Big Mouth 92mm Throttle Body(tm) incorporates major upgrades, including redesigned linkage for smoother operation & improved throttle response 16 http://www.hutterperformance.com/media/images/large/92%20fast.jpg new 470.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 54092 http://www.hutterperformance.com/Product/15/FAST-LSX-92mm-Intake-Manifold.aspx The new LSX(tm) 92mm Intake Manifold by FAST(tm) provides a 20 plus horsepower increase over the factory LS1 intake with no loss of drivability or low rpm torque. Made from a space-age "Amodel(tm)" polymer material that is 30 percent stronger than the stock unit, the LSX(tm) 92mm polymer intake avoids becoming a power robbing heat sink –ensuring the coolest, densest fuel-air charge possible for maximum horsepower output. The LSX(tm) also features integrated nitrous injector ports for use with direct port nitrous injection, and added runner material with witness marks to facilitate porting. In addition, the LSX(tm) 92mm Manifold features a patented three-piece design that allows easy access for porting and custom modifications. 15 http://www.hutterperformance.com/media/images/large/fast%2092mm.jpg new 870.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 54039 http://www.hutterperformance.com/Product/4/Front-Splitter.aspx Splitter for the front of a C6 Corvette 4 http://www.hutterperformance.com/media/images/large/BodyWork3.jpg new 140.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Body/Lighting SP1000 http://www.hutterperformance.com/Product/39/GTO-Crossmember-for-4L80E-Conversion.aspx This is a custom built, TIG welded crossmember for installation of a 4L80E transmission in your late model GTO. We performed this swap from a 4L60E on a 2004 GTO. The crossmember comes powder coated and includes the polyurethane mount. Please note other modifications and wiring is necessary for this conversion. 39 http://www.hutterperformance.com/media/images/large/gto%20crossmember.JPG new 375.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Drivetrain gto-cross-4l80e http://www.hutterperformance.com/Product/38/GTO-Vortech-Supercharger-Inlet-Upgrade-Kit.aspx This is a partial replacement of the Vortech air inlet. The cast aluminum inlet that connects to the supercharger remains the same, but the other pieces of the inlet system are replaced. Our kit consists of a polished aluminum elbow, high quality silicone couplers and a larger K&N filter. This upgrade was installed on a stock 2004 GTO AUTOMATIC with the Vortech supercharger. We found an increase of over 100 rear wheel horsepower initially and an increase of 2 psi of boost. We then upgraded the injectors, fuel pump and added a Kenne Bell boost-a-pump. The end result: The car came to us making 370 RWHP and left making OVER 500 RWHP at 11 psi 38 http://www.hutterperformance.com/media/images/large/GTO%20Vortech%20Inlet.JPG new 195.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Air Intake gto-vortech-inlet http://www.hutterperformance.com/Product/45/Hutter-Coil-Over-Conversion-for-C5-and-C6.aspx Hutter Performance is proud to offer our custom coil-over shock conversion for C5 and C6 corvettes. Unlike other retrofit conversion kits, our kit relocates and modifies the upper and lower mounting points of the shock. This allows for reduced shock angle, increases available shock stroke and provides a more flexible range of ride height settings. Other kits can not match our adjustability due to adapters that reduce shock travel and limit ride height adjustment. This kit includes Penske triple adjustable shocks, custom mounting and hardware, springs, spring adjusters and supports, Hutter Performance custom valving and shock dyno testing. NOTE: THIS KIT IS AVAILABLE FOR INSTALLATION ONLY AT OUR FACILITY. PLEASE CONTACT US TO ARRANGE AN APPOINTMENT. ADD 250.00 for Aluminum frame applications Custom car setup is available 45 http://www.hutterperformance.com/media/images/large/ new 8000.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Suspension hut-coilover http://www.hutterperformance.com/Product/61/Hutter-Performance-Center-T-shirt.aspx Available in White and Black. Sizes: Small, Medium, Large, X-Large, 2X-Large. Please Choose Color and Size. 61 http://www.hutterperformance.com/media/images/large/HPC%20Black%20Rear.JPG new 15.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Apparel HPC-T http://www.hutterperformance.com/Product/29/Hutter-Performance-CNC-LS7-Cylinder-Heads-COMPLETE.aspx Hutter Performance is proud to offer our custom LS7 cylinder heads. These heads are the factory GM LS7 heads assembled with GM LS7 components and fully CNC machined with our custom valve job and blending. The heads offer substantial gains above 4900 rpm over stock cylinder heads. 29 http://www.hutterperformance.com/media/images/large/LS7%20TQ%20graph_1.JPG new 4250.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine hut-ls7-cnc-complete http://www.hutterperformance.com/Product/62/Hutter-Performance-LS-Girl-T-Shirt.aspx Available in White. Sizes: Small, Medium, Large, X-Large, 2X-Large. Please Choose Size. 62 http://www.hutterperformance.com/media/images/large/Hut%20LS%20Fox%20Rear.JPG new 15.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Apparel HPC-T-LSGirl http://www.hutterperformance.com/Product/25/Hutter-Performance-LS6-LS2-CNC-Cylinder-Head-Upgrade.aspx Hutter Performance is proud to offer our custom designed LS6-LS2 cylinder heads. Our heads are fully CNC machined with our custom valve job and blending. The heads offer substantial gains over stock cylinder heads and other comparable cylinder heads. This item is for the purchase of the UPGRADE ONLY. Ship your cylinder heads to us and we will examine them. If the condition of the cylinder heads is approved, the heads will be upgraded. If not, you will have the option of continuing with the purchase of new cylinder heads or having the heads returned to you. NOTE: YOU WILL PAY SHIPPING AND A 65.00 FEE FOR RETURNED HEADS SO BE SURE TO KNOW THE HISTORY OF YOUR HEADS BEFORE SENDING THEM IN FOR UPGRADE. IF YOU HAVE QUESTIONS, PLEASE ASK. THIS UPGRADE IS FOR A BARE CYLINDER HEAD. IF DIS-ASSEMBLY AND ASSEMBLY IS REQUIRED ADD 130.00 25 http://www.hutterperformance.com/media/images/large/LS6%20TQ%20graph.JPG new 1400.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine Hut-CNC-LS6-UPG http://www.hutterperformance.com/Product/26/Hutter-Performance-LS6-LS2-CNC-Cylinder-Heads-BARE.aspx Hutter Performance is proud to offer our custom designed LS6-LS2 cylinder heads. Our heads are fully CNC machined with our custom valve job and blending. The heads offer substantial gains over stock cylinder heads and other comparable cylinder heads. THIS IS A PAIR OF BARE CASTINGS. 26 http://www.hutterperformance.com/media/images/large/LS6%20HP%20graph_1.JPG new 2400.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine Hut-CNC-LS6-BARE http://www.hutterperformance.com/Product/27/Hutter-Performance-LS6-LS2-CNC-Cylinder-Heads-LOADED.aspx Hutter Performance is proud to offer our custom designed LS6-LS2 cylinder heads. Our heads are fully CNC machined with our custom valve job and blending. The heads offer substantial gains over stock cylinder heads and other comparable cylinder heads. The heads are assembled with GM hollow stem intake valves, GM sodium filled exhaust valves, Comp Cams Dual valve springs, Comp Cams Titanium retainers, Comp Cams steel spring seats and PEP valve seals. 27 http://www.hutterperformance.com/media/images/large/LS6%20TQ%20graph_2.JPG new 3550.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine Hut-CNC-LS6-LOADED http://www.hutterperformance.com/Product/28/Hutter-Performance-LS7-CNC-UPGRADE.aspx Hutter Performance is proud to offer our custom upgrade for the LS7 cylinder heads. This upgrade is fully CNC machined with our custom valve job and blending. The heads offer substantial gains above 4900 rpm over stock cylinder heads. This item is for the purchase of the UPGRADE ONLY. Ship your cylinder heads to us and we will examine them. If the condition of the cylinder heads is approved, the heads will be upgraded. If not, you will have the option of continuing with the purchase of new cylinder heads or having the heads returned to you. NOTE: YOU WILL PAY SHIPPING AND A 65.00 FEE FOR RETURNED HEADS SO BE SURE TO KNOW THE HISTORY OF YOUR HEADS BEFORE SENDING THEM IN FOR UPGRADE. IF YOU HAVE QUESTIONS, PLEASE ASK. THIS UPGRADE IS FOR A BARE CYLINDER HEAD. IF DIS-ASSEMBLY AND ASSEMBLY IS REQUIRED ADD 130.00 28 http://www.hutterperformance.com/media/images/large/LS7%20TQ%20graph.JPG new 1050.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine hut-ls7-cnc-upgrade http://www.hutterperformance.com/Product/63/Hutter-Racing-Engines-Hat.aspx One Size Fits All. 63 http://www.hutterperformance.com/media/images/large/HRE%20Black%20Hat.JPG new 12.5000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Apparel HRE-Hat http://www.hutterperformance.com/Product/60/Hutter-Racing-Engines-T-Shirt.aspx Available in White and Black. Sizes: Small, Medium, Large, X-Large, 2X-Large. Please Choose Color and Size. 60 http://www.hutterperformance.com/media/images/large/HRE%20White%20Rear.JPG new 15.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Apparel HRE-T http://www.hutterperformance.com/Product/42/Kenne-Bell-Boost-a-pump.aspx A time tested and proven Kenne Bell innovation, the BOOST-A-PUMP(tm), powers some of the world's most powerful production street and competition vehicles. It activates only at full throttle or boost, so it doesn't "bloat" or "overload" the fuel system at idle or cruise where full time pumps and extra fuel are not required. So, the fuel isn't heated (gasoline begins to boil at 95 degrees). No "cool can" is necessary. And it's much easier to install (cut one wire) and more reliable than fuel pumps. 42 http://www.hutterperformance.com/media/images/large/boostapump.jpg new 229.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > VCM/Engine Electronics KB-BAP http://www.hutterperformance.com/Product/24/Lingenfelter-C6-Air-Intake.aspx The Lingenfelter High Flow Air Intake for the 2005 – 2007 LS2 C6 Corvette has been tested back to back against the competitions air intakes and has been proven to be a better choice for most improved performance. 24 http://www.hutterperformance.com/media/images/large/lingC6.jpg new 329.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Air Intake L650070105 http://www.hutterperformance.com/Product/23/Lingenfelter-C6-Z06-Air-Intake.aspx The Lingenfelter High Flow Air Intake for the 2006 – 2008 LS7 C6 ZO6 Corvette has been tested back to back against the competitions air intakes and has been proven to make more overall performance gains. The Lingenfelter C6 ZO6 air intake system includes the Lingenfelter 100 MM MAF sensor. This air intake will require programming updates. We did not see the gains claimed on the Lingenfelter website, but we did see larger gains from this system than all the other systems we tested. 23 http://www.hutterperformance.com/media/images/large/lingC6Z06.jpg new 669.9500 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Air Intake L650090206 http://www.hutterperformance.com/Product/11/LS-Power-Pack-98-04.aspx We have installed this kit on corvette, GTO, and F-body cars and seen outstanding results every time Our customers love the performance gain and rumble from this kit. We have seen consistent results of 415 plus RWHP on our Mustang 1750 dyno when complemented with a good exhaust system and air intake. This kit will require reprogramming of the ECU. We also recommend installing a colder thermostat. The Kit Includes: FAST Intake FAST Intake Gaskets Comp Cams Hutter Custom 232-236-112 camshaft Comp Cams Dual Valve Springs Comp Cams Titanium Retainers Comp Cams Spring Seats PEP Valve Seals (16) Comp Cams 3-8 pushrods 7.400 Melling High Volume Pump Cloyes Hex-adjust Timing set Damper Bolt Water Pump Gaskets (2) Timing Cover Gasket Damper Seal 11 http://www.hutterperformance.com/media/images/large/ new 2355.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine LS1-PP-C http://www.hutterperformance.com/Product/84/Magna-Charger-Supercharger-System-for-GM-Trk-SUV.aspx BE SURE TO CHECK THE OPTIONS FOR YOUR YEAR-MODEL PRICING Radix Intercooled supercharger system shows significant torque and horsepower gains (non-intercooled Radix offers less power). Please visit http:--www.magnacharger.com for complete details. -CARB E.O. # D-488-9 for select 1999-06 models only -100% complete bolt-on system -Front inlet 5th Gen supercharger with integral bypass valve -Patented cast aluminum intake manifold replaces factory composite unit and features equal-length intake runners that produce higher torque and improved isolation from radiant heat. The best feature of all is the latest in proprietary intercooler airflow technology (patent pending) -"Internal bypass valve" virtually eliminates parasitic loss...and delivers a proven 30 to 66% increase in real world "under the curve" power. Best of all, it costs less than 1-3 of a horse at 60 mph. Now that's real efficiency. -Fuel system includes new injectors, extruded aluminum fuel rails, factory "push-lock" connectors and fuel regulator adaptor -Computer programmer re-flashes factory ECU, spark and fuel calibration, transmission shift points, line pressure and torque converter strategies are optimized to manage increased torque, horsepower and mileage -Std. 3-year limited warranty -Opt. 3-yr.-36,000 powertrain warranty 84 http://www.hutterperformance.com/media/images/large/SUV_2.jpg new 5399.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders MAG-GMTRK http://www.hutterperformance.com/Product/85/Magna-Charger-Supercharger-System-for-GTO.aspx Realize substantial Torque and Horsepower gains throughout the whole power curve -CARB E.O. # D-488-5 for (2004 models only) and # D-488-10 for (2005-06 models only) -100% complete bolt-on system -Front inlet 5th Gen supercharger with integral bypass valve -Patented cast aluminum intake manifold replaces factory composite unit and features the latest in proprietary intercooler airflow technology (patent pending) -180 degrees rotation of supercharger provides straight airflow path for maximum power and efficiency -"Internal bypass valve" virtually eliminates parasitic loss...and delivers a proven 30 to 66% increase in real world "under the curve" power. Best of all, it costs less than 1-3 of a horse at 60 mph. Now that's real efficiency. -Fuel system includes new injectors, extruded aluminum fuel rails, factory "push-lock" connectors and fuel regulator adaptor -Computer programmer re-flashes factory ECU, spark and fuel calibration, transmission shift points, line pressure and torque converter strategies are optimized to manage increased torque, horsepower and mileage. -Std. 3-year limited warranty -Opt. 3-yr.-36,000 powertrain warranty 85 http://www.hutterperformance.com/media/images/large/ new 5999.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders MAG-GTO http://www.hutterperformance.com/Product/83/Magna-Charger-Supercharger-System-for-TBSS.aspx Front inlet 1900 TVS supercharger with integral bypass valve. Radix Intercooled supercharger system adds substantial gains to your Trailblazer SS. Please visit http:--www.magnacharger.com for complete details. 100% complete bolt-on system -Patented cast aluminum intake manifold replaces factory composite unit and features equal-length intake runners that produce higher torque and improved isolation from radiant heat. The best feature of all is the latest in proprietary intercooler airflow technology (patent pending) -"Internal bypass valve" virtually eliminates parasitic loss...and delivers a proven 30 to 66% increase in real world "under the curve" power. Best of all, it costs less than 1-3 of a horse at 60 mph. Now that's real efficiency. -Fuel system includes new injectors, extruded aluminum fuel rails, factory "push-lock" connectors and fuel regulator adaptor -Computer programmer re-flashes factory ECU, spark and fuel calibration, transmission shift points, line pressure and torque converter strategies are optimized to manage increased torque, horsepower and mileage -Std. 3-year limited warranty -Opt. 3-yr.-36,000 powertrain warranty 83 http://www.hutterperformance.com/media/images/large/trailblazerss_kit_small.jpg new 5399.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders 01-12-60-105-BL http://www.hutterperformance.com/Product/53/Paddle-Shift-System.aspx This system utilizes compressed air and is meant for use with a sequential gearbox such as a Hollinger. The system must also be controlled with a aftermarket system such as a Motec. The sytem contains a compressor, accumulator, power supply, misc fittings-hose and stainless steel paddles fit to your steering wheel. We currently have this system running on a track day corvette. 53 http://www.hutterperformance.com/media/images/large/DCP_2189.JPG new 10000.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > VCM/Engine Electronics PaddleShift http://www.hutterperformance.com/Product/40/Pro-Charger-98-02-F-body-Supercharger.aspx This kit includes shipping ,a intercooler upgrade and a set of NGK TR6 spark plugs with the gap pre-set by us for your boosted application. With ProCharger technology, reliably adding big horsepower to your engine is a lot easier than you may think. Intercooled ProCharger systems utilize exclusive features and proven technology to deliver reliable 50-85% gains in horsepower and torque with stock motors running pump gas. ProCharger technology is proven to produce the industry's largest power gains and coolest charge air temperatures. The patented SC design eliminates the need for oil lines and punching a hole in the oil pan. Additionally, instead of being forced to utilize heated engine oil or the grease in sealed bearings, SC ProChargers are lubricated with an extremely high quality synthetic oil which is specifically engineered for high speed use, and produces the least frictional heat and parasitic load. The self-contained design not only eliminates the heat that is transferred to a supercharger by engine oil in oil-fed applications, it also avoids the risk of clogged supercharger oil lines, oil drainage problems, or engine oil leakage. By combining an advanced multi-patented supercharger transmission design with the highest quality oil, SC ProChargers produce a larger net power gain because they run cooler and consume less power than comparable oil-fed designs. ADD 225.00 for polished intake plenum SUBTRACT 750.00 for tuner kit ADD 230.00 for D1SC supercharger upgrade NOTE: We highly recommend custom dyno tuning at a qualified facility after installation of this kit 40 http://www.hutterperformance.com/media/images/large/ new 6745.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders prochg-ls-fbody http://www.hutterperformance.com/Product/33/Pro-Charger-Supercharger-for-C5.aspx This kit includes shipping ,a upgrade to STAGE II and a set of NGK TR6 spark plugs with the gap pre-set by us for your boosted application. Proven to Produce the Coolest Charge Air Temperatures, Greatest Air Flow, and Largest Power Gains. Based on the design of the C6 HO Intercooled system and ProCharger C5 race kit, the new Stage II Intercooled ProCharger system substantially raises the bar for C5 performance. The rugged new bracket design shows more of the supercharger for a better appearance, produces the industry's greatest belt wrap, and allows belt replacement without removing the supercharger. A larger, highly effective 4.5" twin highflow intercooler system with 3" tubing is standard, as is a new, higher flowing air inlet system. And unlike others, not only is all the hardware of OEM quality, a new radiator cradle is supplied to avoid cutting into the stock vehicle. ADD 952.95 for ATI 8-rib drive system ADD 230.00 for D1SC supercharger ADD 1100.00 for F-1C race kit SUBTRACT 550.00 for tuner kit Standard 7 psi boost level will be chosen unless you specify otherwise NOTE: We highly recommend custom dyno tuning at a qualified facility after installation of this kit 33 http://www.hutterperformance.com/media/images/large/procharger%20c5.jpg new 6995.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders ProChg-C5 http://www.hutterperformance.com/Product/34/Pro-Charger-Supercharger-for-C5-Z06.aspx This kit includes SHIPPING, a upgrade to STAGE II and a set of NGK TR6 spark plugs with the gap pre-set by us for your boosted application. Proven to Produce the Coolest Charge Air Temperatures, Greatest Air Flow, and Largest Power Gains. Based on the design of the C6 HO Intercooled system and ProCharger C5 race kit, the new Stage II Intercooled ProCharger system substantially raises the bar for C5 performance. The rugged new bracket design shows more of the supercharger for a better appearance, produces the industry's greatest belt wrap, and allows belt replacement without removing the supercharger. A larger, highly effective 4.5" twin highflow intercooler system with 3" tubing is standard, as is a new, higher flowing air inlet system. And unlike others, not only is all the hardware of OEM quality, a new radiator cradle is supplied to avoid cutting into the stock vehicle. ADD 952.95 for ATI 8-rib drive system ADD 230.00 for D1SC supercharger ADD 1100.00 for F-1C race kit SUBTRACT 550.00 for tuner kit Standard 7 psi boost level will be chosen unless you specify otherwise NOTE: We highly recommend custom dyno tuning at a qualified facility after installation of this kit 34 http://www.hutterperformance.com/media/images/large/procharger%20c5_1.jpg new 6995.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders Prochg-C5-Z06 http://www.hutterperformance.com/Product/36/Pro-Charger-Supercharger-for-C6-LS2.aspx This kit includes SHIPPING, a $200 Hutter Performance credit voucher and a set of NGK TR6 spark plugs with the gap pre-set by us for your boosted application. The new HO Intercooled ProCharger system for Chevy's C6 Corvette began shipping in August 2005. With the coolest charge air temperatures and lowest parasitic load in the industry, this system produces over 600 horsepower on stock LS2 motors with only 6 psi of intercooled boost. The ProCharger C6 supercharger system is 100% complete, features polishing of the supercharger and brackets as standard equipment, is available with a 3 year supercharger warranty and is also 50 state legal (EO D-365-6). SUBTRACT 800.00 for Tuner Kit NOTE: We highly recommend custom dyno tuning at a qualified facility after installation of this kit 36 http://www.hutterperformance.com/media/images/large/procharger%20c6_1.jpg new 7195.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders prochg-c6-ls2 http://www.hutterperformance.com/Product/37/Pro-Charger-Supercharger-for-C6-LS3.aspx aThis kit includes SHIPPING, a $200 Hutter Performance credit voucher and a set of NGK TR6 spark plugs with the gap pre-set by us for your boosted application. HO Intercooled ProCharger Tuner Kits and Complete Systems for the LS3 Corvette offer OEM appearance, fit and finish, and deliver industry leading performance and durability. This new LS3 offering produces a 40-45% hp gain with just 5-6 psi of intercooled boost. Higher boost and power levels are available for modified motors. The front facia design on the C6 Corvette allows for the use of a single, center-mounted, air-to-air intercooler system. When coupled with the high-flowing, durable and extremely efficient ProCharger, this air-to-air intercooler substantially improves overall performance and engine reliability. With a P-1SC-1 self-contained head unit and highly-efficient air-to-air intercooler system, the LS3 kit continues the legacy of ProCharger's industry leading LS1, LS2, LS6 and LS7 supercharger systems. SUBTRACT 800.00 for tuner kit NOTE: We highly recommend custom dyno tuning at a qualified facility after installation of this kit 37 http://www.hutterperformance.com/media/images/large/procharger%20c6.jpg new 7195.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders prochg-c6-ls3 http://www.hutterperformance.com/Product/35/Pro-Charger-Supercharger-for-C6-Z06.aspx This kit includes SHIPPING, a upgrade to a D1SC supercharger and a set of NGK TR6 spark plugs with the gap pre-set by us for your boosted application. This is a TUNER KIT ONLY. The new HO Intercooled ProCharger Tuner Kit for 2006-2007 GM LS7 Z06 Corvettes produces 700 plus crankshaft horsepower on stock motors running pump gas. This system includes the industry standard P-1SC-1 ProCharger with patented self-contained oiling and billet impeller, a highly effective air-to-air intercooler system, and OEM quality brackets and installation hardware. The ProCharger supercharger and brackets are provided with polished finish standard. This product is complete with the exception of fuel injectors and tuning, both of which can be provided by your ProCharger dealer. 35 http://www.hutterperformance.com/media/images/large/Procharger%20LS3_02.jpg new 6595.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Power Adders Prochg-C6-Z06 http://www.hutterperformance.com/Product/22/ProFab-C6-Z06-Tri-Y-Header.aspx Hutter Performance is proud to offer our premium quality stainless steel Tri-Y header and 3-inch X-pipe for C6 Z06 corvettes. These headers are custom built by Pro Fabrication, which has been building SCCA, NASCAR, NHRA and IHRA headers for over 15 years. The workmanship and quality of these headers is unmatched. The flanges are 3-8 laser cut. All connections are Tig welded. The unique 3-piece design allows for extremely easy installation. The 1-3-4 inch to 2-inch primary step, tri-y and squeeze-merge collector maximize gains throughout the rpm range of the engine. The chassis dyno graph is a stock 2006 Z06 vs. the same 2006 Z06 with ProFab headers, Lingenfelter cold air intake and Hutter Performance custom tune. Rear Wheel Torque Gains 3000 = 421 vs. 378 4000 = 450 vs. 413 5000 = 469 vs. 430 5500 = 464 vs. 423 Rear Wheel Horsepower Gains 6000 = 509 vs. 463 6500 = 512 vs. 470 6900 = 502 vs. 461 22 http://www.hutterperformance.com/media/images/large/ProFab%20graph.JPG new 3400.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust PFAB-LS7 http://www.hutterperformance.com/Product/48/Pro-Street-Rollcage.aspx Our roll cages are custom designed and completely TIG welded at our facility. The cages are available from 4-point to 10-point configurations. Our cages are designed to maximize driver safety and enhance the overall appearance of your vehicle. Our cages are offered in DOM mild steel or 4130 Chromoly. The installation must be performed at our facility. Please contact us for scheduling. Additional upgrades are available for this cage, call for details. Transportation is available for an additional fee. 48 http://www.hutterperformance.com/media/images/large/ new 0.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Chassis/Rollcage STREET-CAGE http://www.hutterperformance.com/Product/86/RHS-LS-Series-Race-Block.aspx Designed from heavy-duty A357-T6 aluminum material Siamese cast bore walls (4.100" – 4.165") with press-in spun cast iron liners Available in standard (9.240" or 9.250") & tall (9.750" or 9.760") deck heights with beefy deck thickness (.500" standard-.750" tall deck); standard (5.87") & tall (6.38") deck cylinder sleeves available Extra long liners for standard (5.87") & tall (6.38") decks "Long arm friendly" design – Accommodations for up to 4.6" stroke with standard rod pin diameters (2.100") & oversized 60mm camshaft Designed for clearance – side oil galley moved outboard & engineered rod clearance come standard Raised cam centerline (.388"-9.86mm) to allow larger stroke; 2 extra links in the timing chain – Timing sets available from COMP Cams Bay-to-bay breathing improved with increased side window area versus LSX & LS7 Significantly increased windage passage area under bores & around caps over LS7-LSX engines 6 head bolt design with full water jacket around the cylinders (based on LS7 design) Extra large windows in valley for access to inboard "6th" head bolt Main Cap surface area maximized at mating surface & large fillets from cap to cross bolts for added strength 86 http://www.hutterperformance.com/media/images/large/RHS_LSRaceBlock.pdf new 4439.9900 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine RHS-LSXBLOCK http://www.hutterperformance.com/Product/46/SCCA-T1-Style-Roll-Cage-Roll-Bars.aspx Our roll cages are custom designed and completely TIG welded at our facility. The cages are built to meet the rules and specifications of the desired class. Our cages are designed to maximize driver safety and enhance chassis rigidity and handling. Our cages are offered in DOM mild steel or 4130 Chromoly. The installation must be performed at our facility. Please contact us for scheduling. Additional upgrades are available for this custom roll cage- roll bars, call for details. Transportation is available for an additional fee. 46 http://www.hutterperformance.com/media/images/large/T1%20Cage%20-1.JPG new 8500.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Chassis/Rollcage T1-ROLLCAGE http://www.hutterperformance.com/Product/68/Siemens-60lb-hr-high-impedance-injectors.aspx Call or email for pricing on quantities other than 8. sales@hutterperformance.com 440-285-8467 68 http://www.hutterperformance.com/media/images/large/60lb%20siemens.JPG new 410.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine siemens-60-8 http://www.hutterperformance.com/Product/20/Stainless-Works-C6-Axle-Back-Exhaust.aspx AXLE BACK EXHAUST FOR C6 CORVETTE. 2 1-2" OR 3" CNC MANDREL BENT WITH DUAL TURBO MUFFLERS-FACTORY "BIG BLOCK" SOUND THAT IS MELLOW AT CRUISE. ALSO AVAILABLE WITH STRAIGHT THROUGH MUFFLERS WITH AGGRESSIVE SOUND AND MAXIMUM PERFORMANCE. DUAL SLASH CUT ROLLED EDGE TIPS. CAN BE ORDERED WITH WIDE OVAL TIPS OR DOUBLE WALL STRAIGHT CUT TIPS. PLEASE CHOOSE THE CORRECT OPTIONS FOR SIZE AND TIPS. 20 http://www.hutterperformance.com/media/images/large/SWorks%20C6%20CAT%20BACK1.JPG new 989.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Exhaust SWC6EX http://www.hutterperformance.com/Product/14/Wilson-78mm-LS-Throttle-Body.aspx Wilson 78mm LS Throttle Body - Cable Driven 14 http://www.hutterperformance.com/media/images/large/90%20fast.jpg new 395.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 54016 http://www.hutterperformance.com/Product/13/Wilson-90mm-LS-Throttle-Body.aspx Wilson 90mm LS Throttle Body - Cable Driven 13 http://www.hutterperformance.com/media/images/large/90%20fast.jpg new 425.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 54008 http://www.hutterperformance.com/Product/18/Wilson-LS7-Billet-Bank-Intake-Manifold.aspx Wilson Manifolds has applied the same technology used in our one-off custom designed billet bank sheet metal racing manifolds to our new line of Limited Production Billet Bank Sheet Metal Manifolds. By producing these select manifolds on a limited production basis we are able to provide a much more affordable manifold that fits the most popular cylinder heads and produces excellent overall performance in many high performance and racing applications, particularly with larger displacement and-or high RPM engines. They also look great on street rods and show cars and are designed to fit under stock hoods. These manifolds are ready to bolt on out of the box and are designed to accept Wilson Manifolds high flow throttle bodies and ultra high flow fuel rails as well as Nitrous Pro Flow direct port nitrous systems and manifold pressure relief valves. These designs were developed using our state of the art solid modeling software, and each manifold's cylinder banks (flanges and runners with integral injector bosses, stanchions, and direct port nozzle bosses) are machined from billet 6061-T6 aluminum on our simultaneous 5-axis CNC machining center. NOTE: This intake is designed to perform in the higher RPM range of MODIFIED-UPGRADED motors You will see substantial top end gains but also low end losses. Be sure to consider your application. DO NOT use this on a stock motor unless it is for show purposes. 18 http://www.hutterperformance.com/media/images/large/wilson%20billet%20lsx.jpg new 3400.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 210002 http://www.hutterperformance.com/Product/17/Wilson-LSX-Billet-Bank-Intake-Manifolds.aspx Wilson Manifolds has applied the same technology used in our one-off custom designed billet bank sheet metal racing manifolds to our new line of Limited Production Billet Bank Sheet Metal Manifolds. By producing these select manifolds on a limited production basis we are able to provide a much more affordable manifold that fits the most popular cylinder heads and produces excellent overall performance in many high performance and racing applications, particularly with larger displacement and-or high RPM engines. Wilson intake manifolds also look great on street rods and show cars and are designed to fit under stock hoods. These manifolds are ready to bolt on out of the box and are designed to accept Wilson Manifolds high flow throttle bodies and ultra high flow fuel rails as well as Nitrous Pro Flow direct port nitrous systems and manifold pressure relief valves. These designs were developed using our state of the art solid modeling software, and each manifold's cylinder banks (flanges and runners with integral injector bosses, stanchions, and direct port nozzle bosses) are machined from billet 6061-T6 aluminum on our simultaneous 5-axis CNC machining center. NOTE: This intake is designed to perform in the higher RPM range of MODIFIED-UPGRADED motors You will see substantial top end gains but also low end losses. Be sure to consider your application. DO NOT use this on a stock motor unless it is for show purposes. 17 http://www.hutterperformance.com/media/images/large/wilson%20billet%20lsx.jpg new 3200.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine 210001 http://www.hutterperformance.com/Product/19/Wilson-Manifolds-Sheet-Metal-LS-Intake-Manifold.aspx The ultimate in high rpm performance for your LS series engine. Call or Email for pricing and details. 19 http://www.hutterperformance.com/media/images/large/Wilson%20sheet%20metal.jpg new 5000.0000 Vehicles & Parts > Automotive Parts Vehicles & Parts > Automotive Parts > Engine WM-LS-SM